DIAGRAM OF HEADLIGHTS AND REAR FOG LAMPS AUDI 100

Send

Detailed electronic diagram of the operation of the rear fog lights and front high / low beam headlights of the Audi 100.

Almost every car owner of an Audi 100 is faced with the work of headlights and rear foglights, and you will need a diagram to repair this electronic equipment. At the end of the work, put it back. All schematic symbols are described here.

Diagram of headlights and rear fog lamps:

T2c - 2-pin connector (black) located on the left in the engine compartment;	E7 - Audi 100 fog lamp switch;
T2d - 2-pin connector (black) located on the right in the engine compartment;	E18 - rear fog lamp switch;
T6k - 6-pin connector (black) located behind the dashboard;	L20 - rear fog lamp lamp;
T10a - 10-pin connector (brown) located behind the dashboard;	L22 - connection of the left fog lamp;
T10b - 10-pin connector (brown) located behind the dashboard;	L23 - connection of the right fog lamp;
T10s - 10-pin connector (black) located behind the dashboard;	81 - connection with "mass" 1 in the wiring harness of the Audi 100 instrument panel;
S1 - fuse on the relay board;	82 - connection to "mass" 1 in the front wiring harness on the left;
A20 - connection (15a) in the wiring harness of the instrument panel.	87 - connection to "mass" 1 in the rear wiring harness;